BALL STRAIGHT LAMP SHADE

Simple pendant light design in three sizes. You can make standalone light hangings of a chosen size or do a group of shades to form a cool composition.

Works with IKEA cord set SUNNEBY, easily exchange canopy for printed ones and choose between one cable version to up to 4 cable options. Then you have two options on how to hang long cables from the ceiling.

Fancy to print & sell this design commercially? You can subscribe to my commercial catalogue at: https://designs.cubee3d.com/martin-zampach-lampshades

It is easy to print, and it requires only minimum support.

THE BEST SETUP SO FAR IS:
0.2mm layer height
0.55 mm line width
30° support threshold 
support type tree

SIZES & PRINT TIMES OF LAMPSHADES:
L = 250 mm -  8:30 min
M = 200 mm - 5:30 min
S = 150 mm - 3:15 min

Lamp shades were printed on BAMBU LAB P1S printer and updated profile their slicing sw. All printing information is based on that. Printing time on other machines may vary.