Focusrite 3rd Gen Solo Mount (Wall/Under Desk) with 3 Patterns of Covering

Includes 3 patterns of enclosure and 1 base. Included 3 patterns because I am using mine on a wall mount and decided I wanted to be able to see the red part through. And Hexagons!

Initially I tried another focusrite solo mount from printables but had trouble getting my screws through. also it was a bit loose and didn't show through the focusrite.

I printed mine and had issues getting the cover to slide over the base, so I trimmed the tabs sticking out of the base down a bit. I've adjusted the model to trim the tabs down by ~1mm so it should work better now.

Once trimmed, it was still stiff to slide the cover over the focusrite, but that's good because it means the focusrite is not loose in the bracket.