WAGO 221 extension box for 2 inline connectors

Cable extensions 2-wire using the WAGO 221.

• Print in PETG, because it is more fire-resistant than ABS or PLA.

• Secure with M3 screws and nuts. Suggest screws are 14mm with a hex head.

I like the box for wago221 inline connectors from 
https://www.printables.com/model/326881-wago-221-extension-box

However, I needed a version for two inline Wago 221 connectors, so I remixed it. I made it for the lamp cable that usually has only wires (live and neutral), so I can extend it; however, it can also be used for other electric appliances that have cables with two wires.

I like the box for wago221 inline connectors from 
https://www.printables.com/model/326881-wago-221-extension-box

But I needed a version for 2 inline Wago 221 connectors so I remixed it. I make it for the lamp cable that usually has only 2 wires (live and neutral) so I can extend it but, it can be used for other electric appliances that have cables with 2 wires.