Needle File Handle 3 mm

My set of 10 medium needle files by Vallejo came without a handle so I've designed my own.

This handle should fit any needle file with +/- 3 mm diameter shaft.
The hole is cut 50 mm deep (measured from the chuck tip).

Printed with PETG, but anything that is not too brittle should do.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

.20 mm

Infill:

Filament:
Filament PM PETG White

Notes:

Category: Hand Tools