Played around with the size a bit as it seemed a bit small for fat fingers, scaled upto 105% (couldn't go much bigger as one would find it difficult to get the back into the packet) overall and excellent design and does the job, thanks for sharing.
Wet wipe snap-on lid
Snap this re-usable lid onto your bag of wet wipes, to keep them well sealed and wet.
52
377
9
1105
updated
February 4, 2024
Makes
Comments
It's the best lid option out there, but it still lacks rigidity - the bottom part's clips snap after the first or second use. Also, the connection between the parts is not tight enough so the lid slides and sometimes disengages the hole.
Printed it with Bambu Lab PETG.
Used Standard settings and it was printed perfect on the first try. This mechanism works very well!
@M2MP Great! Thanks so much for posting your make and for your positive comment. I have indeed put a tremendous amount of work into this tiny part. So much more am I happy to hear that it works well for others also. Happy printing!
@HD_Creator Hi,
this modell is still very good, but i found out, that er are different opening sizes of wt wipes. Can you make a bigger version of the modell?
In the picture you can see that your model is too small for these specific wet wipes.
I can give you more information about the size if you want...
View 2 more comments