Top for NVIS HamRadio antenna

this is the top of my variant of the OEVSV (Austrian Ham Radio Club) NVIS Antenna.

it will fit in a 110mm canaltube and is secured with 6 screws int that tube.
it has 9 holes on top where you can put the radiators and mounting strings.
the inside has a hole where you can put the mast in.

the manual and the discription i build this antenna can be found here:
http://www.oevsv.at/export/shared/.content/.galleries/Downloads_Referate/Notfunk-Referat-Downloads/NVIS-Set_Beschreibung.pdf

if you decide to rebuild this antenna you can also have a look on my wire isolators and wire wires. they are very helpfull with this antenna.

DISCLAMER:
i have just rebuild this antenna. i have not came up with the idea of that antenna. i just draw the top cap and want to share it.
the names and credits of this antenna can be found in the named pdf file from the top.