The Button Alternative (Only two spring needed)

❌Support

*2 SPRING NEEDED ONLY* size: ≤3mm wide, 25 to 30 mm long for best performance. (the ones you can find in pens are perfect)

*Don't forget to print 4 Screw*

Assemble:

1. Put all the springs into the holes in the pusher.
2. Put the base on the side of the pusher with springs.
3. Cover the whole thing with the body.
4. Screw the base and the body.
5. Put the cap on the pusher. (glue might be needed)

Instead of 4 springs, only 2 springs are needed now! However, this module will not feel as good as the original one, but you need 2 less spring ;)