Raspberry Pi Squeezebox case V3

Case designed to fit a Raspberry Pi, touch screen display and speakers. 

This is the display I have used https://www.amazon.co.uk/gp/product/B07KJBCNS8/

The speakers - https://shop.pimoroni.com/products/5w-4-ohm-65mm-full-range-speaker

Speaker Bonnet - https://www.adafruit.com/product/3346

Buttons - https://thepihut.com/products/180-piece-ultimate-tactile-button-kit

Button caps - https://thepihut.com/products/black-soft-caps-for-tactile-buttons-1-pack

IR receiver - https://thepihut.com/products/ir-infrared-receiver-tsop38238

Light sensor - https://www.adafruit.com/product/4681

The light sensor can be used with or without the QT-QWIIC connectors.

All items printed at 0.2mm layer height with a 0.4mm nozzle. No supports

8 off M3 countersink screws are required to screw the case together.

8 off M4 countersink screws and nuts are required to mount the speakers.

M2.5 screws to mount light sensor and button PCB.

I've reduced the number of parts required to print - the case is 1 piece with just a separate top and front. This also means less screws.

Light sensor has been moved to the front to help it better react to changes in lighting.