caberQU USB-C Cable Tester Case

A case for the simple and very helpful caberQU USB-C Cable Tester to test your USB-C cables.

Complete redesign of SteveW91s case:

• Use counter sink screws
• Added a cutout for the shield LED

To assemble the case you need:

• 2x countersink screws (M3x12)
• 2x M3 heat threaded inserts
  A set of different sizes can be found here

Support my work

For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).

If you want to support my work directly, you can buy me a coffee.

If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |

Also check out my other models.

Complete redesign to be able to use countersink screws and added a cutout for the shield LED