Get Free Shipping & Prusaments with the Prusa XL Summer Deal!

Taipei 101 (Tchaj-pej 101) decorative lamp /70cm/

Skyscraper Taipei 101 (Tchaj-pej 101) is found in the town Tchaj-pej, the capital city of Chinese republics in Taiwan…
7h 35m
10× print file
0.15 mm
0.20 mm
0.40 mm
138.00 g
Your funds support the creator's further activity.
$8
1
0
168
updated June 10, 2024

Description

Edit 03.02.2024:

Newly re-sliced for Prusa MINI+ with IS support in .bgcode

 

Skyscraper Taipei 101 (Tchaj-pej 101) is found in the town Tchaj-pej, the capital city of Chinese republics in Taiwan
Has altogether 101 floors and reach heights of 509 m
At present time is the tenth highest building in the world

This is my own model of the Taipei 101 (Tchaj-pej 101) - simplified for 3D printing and adjusted for using like a decorative LED light source

Download -> Share -> Print -> Rate -> Donate -> Enjoy -> Thank you

Created for printing WITHOUT supports

Print instructions

Building is divided to the three sections - every single section is divided to a few single parts pasted together
Every section own the picture-manual of assembly

Section 1:
NO supports are required 
this section is made from following models:
base_piece.stl (we need to print 4-times)
window_round_base_piece.stl (we need to print 4-times)
window_square_base_piece.stl (we need to print 4-times)

Picture for this step: "Section1_Assembly Plan"

Section 2:
NO supports are required 
this section is made from following models:
middle_section.stl (we need to print 8-times)
window_middle_section.stl (we need to print 32-times)

Pictures for this step: "Section2a_Assembly Plan" + "Section2b_Assembly Plan"

Section 3:
NO supports are required 
this section is made from following models:
top.stl (we need to print 1-time)
antenna.stl (we need to print 1-time)
window_top.stl (we need to print 4-times)

Picture for this step: "Section3_Assembly Plan"

Building holder:
NO supports are required 
the model that I use is named:
holder_individual.stl 
Design of this model hangs on used light source and is recommended to adjust it for your needs!
I used standard 10mm LED strip in 12mm aluminium profile. Both inserted in holder to verticaly situating the alu-profile with LED strip and power cable from power supply is situated in bottom of the holder.

Now we are ready to put the skyscraper to our prepared LED lightsource

Picture for this step: "Final building_Assembly Plan"

Enjoy this print :) 
Thank you for your support

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more