Geeetech A10 Pro MCU Fan Cover (GT2560 ver 4.0 board)
Description
PDFMCU Fan cover for the Geeetech A10 Pro, with the GT2560 ver 4.0 MCU. Remix of the model by Despacho3d. Helps prevent print material from falling through the fan grate, possibly causing overheating and failure of the MCU. Also helps to reduce the noise of the MCU cooling fan.
Print Settings
Printer:
Geeetech A10 Pro
Rafts:
No
Supports:
No
Brim:
No
Resolution:
0.2mm
Infill:
15%
Filament:
Dream Polymers PLA
Black
Notes:
Brim shouldn't be required, although I used one for my print. I had just got a new PEO build plate and a BLTouch, had some issues with the ribs coming off during the print. Don't feel like it should be an issue if you have your bed dialed in.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
The fan by Despacho3d did not fit my version of the Geeetech A10 Pro. I have the version with the GT2560 ver 4.0 board. The original was too narrow to fit properly, so I widened the sides in Fusion 360 and adjusted the hole placement. I also had to adjust the height of left side, as there wasn't enough clearance for my Y-axis guide wheels.
