Hedgehog

A no-support necessary model of a little hedgehog. All it needs is a fluff ball of some kind - yarn or fur pompoms are perfect. Print size at 100% is about 50mm/2 in. Can be scaled up or down. The smallest I've printed is less than half that.

*Hedgehogs pictured are painted with paint markers and resin gloss with a yarn puff

Printed on Ender 3 V2 in PLA

Layer height: 0.2 for 100%, 0.1 for smaller

Supports: no

Bed adhesion: skirt/none

Infill: recommend at least 10%

Make sure you have good cooling, if not, the overhangs on the feet can get a little blobby

**Update: 2-12-2024

There was an issue with the eyes that is hopefully fixed now

**Update: 2-16-2024

It wasn't fixed. Hopefully now it is! Added a round eye and flat eye version

Please tag me if you make them, I love to see!