High Laptopstand 15"/17"

High laptop stand, designed for 17" laptops, without supports

Originally designed for my Asus G17, but should fit most 15" or 17" laptops.
The stand raises the laptop approx. 8-9cm at the front and runs upwards at a 30° angle.

Laptop bottom must not be thicker than 25mm.

Printing profile:

PLA

20% infill

no supports

Fuzzy skin - all walls - point distance: 0,5mm - skin thickness: 0,1mm

Weight: approx. 130g per part

Filament used: DasFilament Grüngold