CDA Twin Range Cooker lower door handle

I've made a handle for the lower door on our CDA oven. Function over form. 

I can't say what model it is exactly as it's oven 10 years old now I reckon.

I've made many versions, the biggest issue is the gap between the lower door & oven door when the oven door is opened, the gap gets to about 3.2mm so I've made it as thick as possible. 

It will also use the same screw so no need for anything else unless you want too. 

It does the job. 

Wouldn't recommend PLA as it warps from oven heat. I've used PETG for now. ideally it would be ABS or something.