Precision Steppers for Wargames & Miniature Games

This steppers are for precision movement in tabletop games, especially Wargames. They are used to represent small movement intervals without touching the miniatures

The 3mf files are prepared to be printed in multicolor with only one extruder through two different prints.

If you want to achieve something like this:

1. Disable the skirt
2. Increase Z-Lift to 0.4mm or 0.6mm
3. You might need to tweak the Elephant foot compensation for the bottom part.
4. Ensure that the models are placed with the markings against the heated bed.
5. Print the bottom part slowly and make sure your bed adhesion is good
6. After the bottom part is printed, don't turn off the print bed
7. Check if there's stringing of any small border to be cleaned.
8. Change color
9. Print the top part.
10. It should print the negative space of the markings and the material should be fused together.

For a video tutorial, check this video@3:42