Aquarium Under Gravel Filter

A set of modular under gravel filter plates in sizes from 50x50mm to 250x250mm. These can be joined together to form larger sizes and shapes.

The uplift tube mount fits a 42mm ID tube - can be printed or use an acrylic pipe.

To link plates use 2 or 3 joiners on each edge.

PETG with 100% infill recommended. For the uplift mount, ensure “Remove small overhangs” is not enabled if using Bambu slicer.

If you use any form of glue on the print bed, remember to throughly wash parts before adding to your aquarium.