Remix: GoBo projector for Bowens mount and m42 lenses. Uses Godox GoBo's.
Description
PDFAll credits go to original creator! I used alu tape to get a little bit more light out of the device as advised by original creator. Printed in PETG (gray) except the GoBo holder (PLA, black). Supports only used where the nuts go to support the bridge. Closed the hole (1 layer) to improve bridging. Just use a drill here.
Many Thanks to original Creator!
UPDATE 1: On request uploaded a FrameExtenderGODOX_TEST. This should fit the original GODOX holder. This is still being fitted by another user and I'm waiting on feedback. Focal plane will not be correct > on the to do list.
UPDATE 2: I've myself printed many gobo holders and placed a lot of gobo onto them for easy swapping (using a very small piece of double sided tape) > Creating a storage issue… Uploaded a solution for this. GoboCase.stl & GoboCaseCover.stl. Somewhat oversized! I wanted to use foam (one sticky side) inside for protection.
I've added some pictures of the projector in action. Unfortunately, lost the pictures of the case in action…
Model origin
The author remixed this model.
Differences of the remix compared to the original
- This one accepts 66mm Godox GoBo's.
- This one uses M5 bolts and nuts instead of M5 inserts.
- Realigned and flattened (to build plate) the Bowens mount lugs.
- Rounded some corners
