Recommend a Prusa printer, earn $30! See the updated Prusa Rewards Program.

IKEA Micke cable hole reducer to Ø60mm / Redukce IKEA průchodky na Ø60mm

The Solight plug required a tighter hole than the one on the IKEA table.

1h 34m

1× print file

0.15 mm

0.40 mm

36.00 g

351

updated February 1, 2024

Description

I bought the Solight table socket designed for the 60mm hole, which was much less than the standard hole in the IKEA table, so I printed a reducer.

The reducer fits very tight, I had to install it into the table using a hammer.

Printed from Prusament PLA with 0.15mm layer, 15% infill and 3 perimeters.

------------------------------------------------------------------------------------------------------------

Redukce průchodky v IKEA stole pro zapuštěnou zásuvku Solight.

Navrhl jsem to dost an těsno, takže jsem to do stolu musel natlouct kladivem.

The author marked this model as their own original creation.