Saint Valentin Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Wanhao noir Transmission Distance: 5
PLA Wanhao rouge Père Noël Transmission Distance: 5
PLA Wanhao Macaron rose Transmission Distance: 5
PLA Wanhao White Transmission Distance: 5

Swap Instructions:
Start with noir
At layer #7 (0.64mm) swap to rouge
At layer #12 (1.04mm) swap to Macaron rose
At layer #17 (1.44mm) swap to White for the rest.