Vingl

Right-angled ruler with a 45-degree angle and marking points of 5 mm.

• PLA
• Grid - 15% infill
• Face (numbers) on bottom
• Edges already adjusted for elephant foot (mine :-P)

To avoid lifting corners when printing, it is better to print it with mouse ears or even with outer brim.

• Changes from Vingl to Vingl1.1 …. numbers recessed only 0.6mm

For more precision added:

• Vingl1.1_5mm …. marking points ø5mm
• Vingl1.1_3mm …. marking points ø3mm
• Vingl1.1_15mm …. marking points ø1,5mm