DeWalt DW735 Height Handle

Simple handle replacement for the DeWalt DW735 Planer/Thicknesser.

Few others around to download but couldn't find one that “felt” right so I designed my own! Uses stock bolt, I do recommend a washer between the handle and the round body, just so the thing runs smoother and wears less at the end. 

There is a thin area at the transition of hole diameters inside, this is so you DON'T need to print supports as it will just bridge over the hole. you will need to pop/drill it out after printing! 

HIGHLY recommend using wax (not oil) to lube between it and the bolt for smoother operation !