Hyperpixel 4.0 touch and Raspberry Pi 3/4 case (with LACK table bracket)

Hyperpixel 4.0 touch and Raspberry Pi case

Based on https://www.thingiverse.com/thing:4280820

For more information have a look at the source.

This remix adds:

• Support for a Raspberry Pi camera module
• A Raspberry Pi 3 and 4 version
• Source files on github: https://github.com/mkevenaar/hyperpixel-raspi4b-case 

All files:

• Number required: 1
• Material: Prusament PETG
• Layer: 0.20mm (Quality)
• Infill: 15%

Lower Case 3/4 with or without camera:

• Supports: Support on build plate only

LACK Mount:

• Rotate on side to print without supports