Pen and Note Holder - Etc design

I can never seem to find a small piece of note paper and a pen together at the same time, so I made this simple organizer. It is sized to fit small note pads (A7, ~3" x 5") or sticky notes (or both together). 

While you can use this with a small note pad (as noted 😁) I prefer to use loose paper which I make by simply cutting letter sized paper into 8ths (cut in half 3X); this makes it easy to grab a single small piece of note paper.

Print Instructions

Print in PLA in two color via filament switching using the 3mf files provided, otherwise :

• 0.2mm layer height
• 2 perimeters
• 10% rectilinear infill

Orient the model on the print bed on its back, with the “etc” facing up.

CAD

The OnShape 3D CAD files for this are here :

https://cad.onshape.com/documents/49555bf8c0fd169ae960b7a5/w/03bbf9744ebd8c8b6dfd66df/e/d52ae64e418b342c50eb788a?renderMode=0&uiState=65baa8826c905652a91b2b1c