Reversed Phone Support
I reversed the orientation of the phone support, in case you accidentally used the wrong side of the "frame/body" part.
6
20
0
312
updated January 31, 2024
Description
PDFI accidentally used the other side of the frame to connect the legs and arms, and only realized when I was about to attach on the phone support bits to the frame.
The model leaves enough room for a USB-C/Micro USB/Lightning Port to fit through in between the support so you can still use the exo-suit while charging.
Model printed with Prusament PLA Jet Black at 0.20mm using Prusa Mini+ (Bondtech Extruder), with Brim and Organic Supports. Brim and Supports may not be needed, but I used them just in case. Upright should be the best orientation for no/minimal supports.
Model origin
The author remixed this model.
Differences of the remix compared to the original
Reverses the phone support part of the frame to still make the exo-suit usable, if you used the wrong side of the frame.