Sticky Note Dispenser - HSW (Honeycomb Storage Wall)

I wanted a Sticky Note dispenser easily accessible on my honeycomb storage wall, so I found a dispenser design for the Sticky Notes that I already had, and remixed it to make it compatible with the honeycomb storage wall.

I recommend printing this vertically to eliminate the need for supports, 0.2mm layer height for better quality, even though it may take longer to print. 
This model uses a m3 8mm screw with 3" x 3" Post-it Notes.

To use this add the Post-it Notes to the slot and just pull from the top middle forward to take one out.

F3D and STEP Files are provided, feel free to remix it.

If there are any other variations that you would like, don't be afraid to request them in the comments.

Thanks for reading, Happy Printing!

Removed the 2 other sticky note holders and added a m3 screw hole to make it compatible with the HSW system.