*Solder free* Minimalist 3D Printed Fume Extractor

I use solder with lead and breathing those fumes can be deadly. So i started looking for a great fume extractor. I came across the "Minimalist 3D Printed Fume Extractor" by rdmmkr but i didnt want to solder the components without an extractor so i came up with this design of a Solder Free version based off rdmmkr's original design.

list of changes i made

Body:
   ➢ 38mm fan section needed to be widened to 38.5
   ➢ AC adaptor and wire holes were closed
   ➢ Hole for power plug created
   ➢ Recessed are for switch removed
   ➢ Enlarged the SwitchPlate holes for M3 screws
SwitchPlate:
   ➢ Removed switch and led hole
   ➢ Enlarged holes for M3 screws

Parts need:
   ➢ 2ea M3 screws (used to attach switch plate to body) - https://amzn.to/3HAKnue
   ➢ 4ea M3 screws (used to attach included grill to the back of body) - https://amzn.to/3HAKnue
   ➢ 120v AC fan - https://amzn.to/3HHgLLL
   ➢ Carbon Filter (cut a single filter into 4 smaller squares and stack two in the cartridge) - https://amzn.to/3SCebg6
   ➢ 4ea rubber feet https://amzn.to/3Sm1h4A
➢ OPTIONAL 120v remote switch with dimmer (i have not tested, if you do please let me know how it works in the comments. thanks!) -https://amzn.to/47U823p

list of changes i made

Body:
   ➢ 38mm fan section needed to be widened to 38.5
   ➢ AC adaptor and wire holes were closed
   ➢ Hole for power plug created
   ➢ Recessed are for switch removed
   ➢ Enlarged the SwitchPlate holes for M3 screws
SwitchPlate:
   ➢ Removed switch and led hole
   ➢ Enlarged holes for M3 screws