Bantam West Shadow Governors Insert - Fully Sleeved

This is my design for the Bantam West Board Game. This insert is designed to hold sleeved cards (more information below) as well as all of the extra addons that came in the Shadow Governors edition pledge.

There is a lot to print here - 27 total pieces (the Tarot Card decks need to be printed twice). This will roughly eat up about a Kilo of filament and it does feature lettering so if you want to get fancy and color swap to add clearer text then have at it. It will probably take 25-30 hours total to print everything on a modern high-speed printer (250mms average).

This does not require any supports to be printed. The longest piece is 202 MM in length so it should fit on most print beds. The photos provided show the stacking order in the box - layer by layer.

The pictured version was printed on a Bamboo Labs X1Carbon with a 0.4 Nozzle using Matte Orange and Black colors. (special thanks to Mike).

Please let me know if you have any issues - I will be happy to fix STL's with issues however this has been printed a total of 3 times and we have yet to run into any issues other than sleeves having different sizes.

Sleeves - this was designed for Paladin brand sleeves. However anywhere a standard playing card is pictured it is sleeved in a dragon shield matte clear. Each Tarot Deck holder fits 32 sleeved cards each. The Stables has a well under the horse cards for the special ability horse cards. There is a lot going on in this insert and I think it is just gorgeous.

As this is my first experience in hosting a marketable product, I am not allowing remixes and I certainly do not want to see this insert in someone's webstore. This is for personal use only.

Happy Printing =)

V2.0 Edit 2-7-2024

Updated Resource Tray 2 - Changed from Iron Bars to Silver Bars (sorry about that!)
Updated Mounts Tray - Slightly deepened some of the saddle wells for a more flush finish.
Updated Hearth Arsenal - Added a gap on the thin side wall for easier access.