WiFi Camera Wall Mount (Tapo C210) - remix
Description
PDFI made a remix of the wall mount for Tapo C210 WiFi camera.
I have simplified the wall mounting part with the holes, in order to reduce the printing time and to increase the durability of the part if by mistake you apply a force and form a lever on the camera arm.
The new shape but also the different printing position compared to the original model gives the piece a much higher resistance.
Very easy printing.
Software: PrusaSlicer 2.7.1
Printer: Anycubic Kobra 2 Pro
Layer height: 0.2 mm
Top/ button : 4
Perimeters : 3
Infill : 20 %
Brim : yes, 3 mm
Skirt : No
Support : No
Material : PLA
Printing time : 1 hour and 30 min. for all parts.
If you print this accesories please share your make, leave a review, and drop a like!
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
I have simplified the wall mounting part with the holes, in order to reduce the printing time and to increase the durability of the part if by mistake you apply a force and form a lever on the camera arm.
The new shape but also the different printing position compared to the original model gives the piece a much higher resistance.