I have few microscopes and many eyepieces.
I was tired of having eyepieces lying around or in plastic bags.
I designed a case that stores 2 eyepieces for biological microscope with diameter of 23,2mm.
Usually for older Carl Zeiss Jena, Meopta, PZO, and similar microscopes.
Should fit most or all sizes.
Bottom base is only one model and there are 2 types of top cover.
Smaller, that fits 90% of eyepieces and taller that is for eyepieces with longer top part.
Smaller top - min and max dimensions = 6,5 - 24,5mm
Taller top - min and max dimensions = 28,3 - 45mm
If it doesn't fit yours, feel free to contact me with the dimensions and I can make third cover.
My print settings:
- printer: Prusa MK4
- sheet: satin (cleaned with window cleaner and dish sponge)
- layer height: 0.2mm
- nozzle diameter: 0.4mm
- print orientation: as in the STL file
- material: PETG (recycled PETG)
- supports: not needed
- perimeters: 3
- bottom solid layers: 5
Please consider donating me on ko-fi site if you like my work.
The author marked this model as their own original creation.