Kobra 2 Max Hotend Shroud/Cover for upgraded fan duct

I made the amazing upgraded fan duct from https://www.printables.com/model/724096-kobra-2-pro-max-plus but didnt like how it left the hotend exposed so I remixed an original cover. It removes the ability to completely dissconnect and reconnect the fan but covers the electrics and still allows you to change nozzle and clean the fan. 

Should be attatched with the original bolts and heated inserts but can also have the bolt holes heated up and squished in to allow a small self tapper to be used (which is what i did as i dont have any heated inserts at the time of making this.

Prints well upside down but looks better right way up with supports.

More than welcome to use this to make a version with less of the left side to make the fan cable removable.

First thing Ive ever designed so its not perfect but it works! Happy printing!

Removed the necessary material to fit the https://www.printables.com/model/724096-kobra-2-pro-max-plus fan duct. And added the hole to adjust the extruder spring.