Bauer Battery Charger Wall Mount Base

Simple replacement base for the 1.7A Bauer battery charger that comes with the drill/charger/battery combo.  Adds the ability to wall mount.  I matched the contours enough to have it snap together.  I didn't bother transferring the vent holes in the base since there are holes in the top.  

Printed in Polymaker Red ASA, which matches the factory color pretty well.  There is a chamfer in the slot, making bridging easier and supports not necessary.  This was a tricky print in ASA, requiring glue stick and about 4 added discs per side.  PLA didn't have much of an issue while prototyping.

Fusion file included in case anyone needs to make modifications.  No promises the constraints are set up properly, this was a learning experience :D

Model made from scratch, but used the hole spacing dimensions from the original.  This can be a tedious process, so I wanted to acknowledge the work of RichardFranks here.  Differences include matching the contours of the top and a tab at the bottom to keep it from shifting up while tearing out batteries.