Open Logic Sniffer box including aligned wing board

The Open Workbench Logic Sniffer (https://www.seeedstudio.com/Open-Workbench-Logic-Sniffer-p-612.html?queryID=b9b3c1a90d4e53bd93ce2db349053085&objectID=1928&indexName=bazaar_retailer_products) is a very useful tool, but the standard configuration has the wing sticking out sideways, making it even more fragile. This box aligns the wing pins and protects the boards against shorting and damage.

The wing allows +5V signals for the channels 16 to 31 to interface with the OWLS (https://www.seeedstudio.com/Logic-Sniffer-16-bit-Input-Buffer-Wing-p-721.html?queryID=47a577da3824cc0205715ca83b7f3c65&objectID=1848&indexName=bazaar_retailer_products). Default it sticks out sideways for this case the connectors are replaced by wires, allowing the channel pins to be aligned with the base board channel pins.

This box is an application of my https://www.printables.com/model/472419-unibox library.

The Logic Sniffer is supported by https://github.com/GadgetFactory/OpenBench-Logic-Sniffer (GUI) and https://sigrok.org/wiki/Main_Page (cli).