SSUPD Meshroom S front extender

This is a front extension panel for the Meshroom S which uses the native case hardware (no clips needed).

I used ASA to make sure it would survive the heat of the case, but other materials may be suitable.

I found several options for other SSUPD cases, but none were made for the newer Meshroom S, so I heavily modified a part I found on here.

Also added a slimmer version - suitable for ATX motherboard with SATA but not front fans (slim version is the one in the photos)

I changed the length/width/height, location of the clips, and designed new ball-joints to modify the original model for use with the newer Meshroom S case.