Updated: GameBox

This is a game box that contains Chess; Nine Men's Morris; Backgammon; Man, Don't Get Angry; Draughts and Othello (Reversi). More games are possible, there is still quite some place for other boards in the box.

I printed the chess board version 1 and was not to happy with the mounting therefore I did a rework and that is V2 (I suggest to print V2, even if I did not test it yet). 

Also the Backgammon board is not to well, I will try to update that as soon as I have some time.

The dice did not come to well so I use some dice that I still have.

The chess figures I did not design since there are already a lot.

In general I tried to put in the file name if parts have to be printed more than once. 

I used normal loctite to glue parts together. For the hinges and connectors of the box I used filament.

For the Othello stones (GB_OthelloStone_Bicolor_64x) I did a filament switch at 2mm. I used the classic black/white for this. Furthermore I selected ironing in the settings of the prusa slicer to also make the top layer a bit more smooth.

I printed (almost) everything with 0,2mm.

Except for the connectors I used 20% infill. The connectors I printed with 100%.

Following soe links to Wikipedia where the rules of the games are explained:

https://en.wikipedia.org/wiki/Mensch_%C3%A4rgere_Dich_nicht

https://en.wikipedia.org/wiki/Reversi

https://en.wikipedia.org/wiki/Nine_men%27s_morris

https://en.wikipedia.org/wiki/Draughts

https://en.wikipedia.org/wiki/Chess

https://en.wikipedia.org/wiki/Backgammon