HueForge - Carpa Koi

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Generic Transmission Distance: 0.3
PLA Generic Yellow Transmission Distance: 5
PLA Generic Orange Transmission Distance: 5
PLA Generic Transmission Distance: 6

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Yellow
At layer #11 (0.96mm) swap to Orange
At layer #14 (1.2mm) swap to White for the rest.