3D PRINTED MARBLE RUN

An inspirational design re-engineered for 3D Printing.

Its designed to be used with 10mm balls/Marbles.

It is very addictive to watch. The design allows for use of up to 4 marbles with ease.

You will find the build instructions here:

https://www.youtube.com/watch?v=jIGBb8CHVqw

3D Printer used:
Creality3D CR-10: https://www.banggood.com/custlink/mKKKbFZRH4

To complete this project, you will need the following
5 MR105 Bearings
https://www.banggood.com/custlink/KG33zZj9GT

3 M5 x 20mm Screws
1 M5 x 15mm Screw
1 M5 x 10mm Screw
2 M3 x 20mm Screws
4 M3 x 10mm Screws
1 M3 x 20mm Screw
8 M3 Nuts

Fastners on BangGood:
https://www.banggood.com/custlink/3G3mncuPP4

1 KCD-101 Switch

1 9V Battery Connector

1 12V Geared Motor
https://www.banggood.com/custlink/mDvGAr758t

AMAZON

A small length of DC Wire
Your Favourite Bonding Agent.

And some 10mm Steel Balls
https://www.banggood.com/custlink/3DG3AcfV80

You will also require the following tools:
Appropriate screwdriver (Powered Recommended)
Clamp
A pair of pliers.

All BangGood links here are Affiliate Links.