Spoolholder Hex Pattern

A simple spoolholder with a hex-pattern. Fits perfect for Prusament spools.

Print instructions

• Best results with 0.15mm but also works with 0.20mm.
• Print with PLA or PETG
• Print with support on build-plate only for body
• 15% infill

For a complete spool holder, you'll need to print 

• 1x Steg 
• 2x Body

Assembly

For one complete spool-holder, you'll need:

• 4x 608-2z ball-bearings (22x8x7)
• 2x M3x12 screws (optional)

Either use M3 screws or use glue to put everything together.