Chat hueforge

180x130

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Wanhao noir Transmission Distance: 5
PLA Wanhao rouge Transmission Distance: 5
PLA Wanhao Jaune Transmission Distance: 5
PLA Wanhao White Transmission Distance: 5

Swap Instructions:
Start with noir
At layer #7 (0.64mm) swap to rouge
At layer #11 (0.96mm) swap to Jaune
At layer #15 (1.28mm) swap to White for the rest.