The Ring Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Wanhao noir Transmission Distance: 5
PLA Sunlu Bleu Transmission Distance: 5
PLA Wanhao bleu ciel Transmission Distance: 5
PLA Wanhao White Transmission Distance: 5

Swap Instructions:
Start with noir
At layer #6 (0.56mm) swap to Bleu
At layer #10 (0.88mm) swap to bleu ciel
At layer #13 (1.12mm) swap to White for the rest.