BeamCase - one sided fan bracket (multiple sizes)

This fan bracket is made to add fans to your BeamCase. It comes in different sizes for 120mm, 140mm and 92mm fans of different thicknesses. The bracket is secured to the fan with standard fan screws and then screwed to the frame from the inside for optimal space usage. 
This bracket is optimal if you wanna save space and secure the fans only from one side.  

These brackets are designed to work together with the modular BeamCase ITX case which can be found here.

Required Hardware

Screws: 
M3x8mm countersunk screws for the 17mm version (2pcs per bracket)
M3x16mm countersunk screws for the 25mm version (2pcs per bracket)
standard fan screws (come with your fans)

Nuts: 
standard M3 nuts (2pcs per bracket)


Print Instructions:

Ideally print this model in a stronger and more temperature resistant filament like PETg or ABS. In order for the bracket to work perfectly it has to be printed accurately, so compensate for shrinkage. This print like all BeamCase parts does not require any supports. 

I adjust for ABS shrinkage by scaling the model to 100.5% (Bambu Lab P1S and Sunlu ABS) , but it depends on the filament and printer and print speed.