XY-SK80H Buck Boost Converter Case

This is a case for a XY-SK80H Buck Boost Converter. It fits many different
models having this form factor (39mm x 71.3 mm). You'll need the following to
assemble it:

 * 4 M3 x 5 mm brass insert or glue
 * 4 M3 x 8 mm screws or glue
 * 4 ferrules (optional)
 * 1 KCD1-101 switch
 * 2 black binding posts (mounting diameter of 8 mm)
 * 2 red binding posts (mounting diameter of 8 mm)
 * Some wire
 * Soldering related tools

Support material is not required for the main body. Support material that
touch the build plate is required for the bottom cover. An infill of 25% is
recommended.

This object main web page is:  
http://www.ctheroux.com/xy-sk80h-buck-boost-converter-case/.

This object was designed using Solid Edge Community Edition.

You can request the source files on the page listed above.