Kent Dust Boot Adapter for CNCROUTERPARTS Avid CNC Spindle from Bosh 1617

Adapter ring with cutout in case you purchased the kent dust boot for a bosch router. the original dust boot is 90mm in diameter and the spindle from cncrouterparts/avid cnc is 80mm.

I did not want to have to buy a new one or create one from acrylic. This quick print costs so little and works so well.

With the cutout on the side, the retaining adjustment on the dust boot works perfectly still. It took about 2 hours to print at 40% infill out of pla. It was the filament I already had in the printer and unless the spindle heats up enough to melt this thing, which would be a wwhole other problem, then it should last.

Print Settings

Printer:

Creality ender 3 with hemera

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

40%

Filament:

Black

Notes:

I placed the ring inside the connection with the rim on top of it. It should fit under if you need that. I put it on top because, gravity.