Cube Structure (1/2" EMT)

A cube like structure. The corner pieces orthogonally connect three pieces of ½" EMT conduit and are modeled to allow small wire runs inside them as well (~8mm wide gap). The base piece can be used to stand the cube on a corner.

The size of the cube is dependent on the conduit length you choose, and the panels should have a side length equal to the length of your conduit in order to fit well. Since the panels are bolted onto the outside of the structure any thickness of material will work as long as your M3 bolts are long enough to pass through it and the corresponding mount behind it. 5/16" bolts with a length of 2in+ are required to affix the inside of the corners to the outside. Nylock nuts are recommended on all bolts during assembly.