MultiBoard Bin Dremel Bit Storage

This is Dremel rotary tool bit storage for MultiBoard bins, based on KeepMaking's MultiBoard system. 

There are four different models: 

MultiBoard .25 Bin Insert with a 23mm circle container hole for tubes of sanding disks; one file is closed on the bottom, and one is open on the bottom.

MultiBoard .25 Bin Insert with a 26mm circle container hole for tubes of sanding disks; one file is closed on the bottom, and one is open on the bottom.

Printing:

“No support needed”

I print at 0.2mm height.

Infill about 15 percent.