Loft / Bunk Bed Tray (Multi-Part)

Designed for a college dorm room lofted bed, this organizer tray is meant to attach to the safety rail. It is provided as multiple components for easy printing (and colour coordinating).

Several different sizes are provided for the attachment arm to most closely match the thickness of the safety rail. Screws are provided for tightening to the rail.

Tips:

• The large, flat tray may be best printed in PLA, 3-4 perimeters, to minimize warping (any warping may affect assembly) – no supports
• The attachment arm is printed well with PETG, on its short side, for maximum strength, 4+ perimeters (PLA may creep over time depending on the screw tension) - no supports
• The screws (2x) can be printed PLA (flat on their heads), with one or two extra perimeters - no supports
• The cups are best printed upside down. They work without supports (MK3s) but will have a rough inner-bottom. Supports will solve that.