608-2RS To M4 Bearing Bushings

608-2RS To M4 Bearing Bushings

print Settings:
nozzle diameter: 0.20mm
layer height: 0.20mm
infill: solid walls
support: NO
walls: 3
top and bottom layers: 2 to 4
material: PLA

Parts Needed:
608-2RS Bearings: https://tinyurl.com/2ctn43y3
Bolts: https://tinyurl.com/5bz4xaz6

Special Instructions:
Drill Out Central Hole With 4mm Drill Bit holding parts in vice or with pliers prior To insertion into Bearing as its almost impossible afterwards

please feel free to leave comments and feedback
please checkout my other designs:
https://www.thingiverse.com/carter\_383/designs

Links:
printer: https://tinyurl.com/whd9ruaj
filament: https://tinyurl.com/pr7d5cs6

Print Settings

Printer Brand:

Creality

Printer:

No

Supports:

200

Infill: