608-2RS To M4 Bearing Bushings
print Settings:
nozzle diameter: 0.20mm
layer height: 0.20mm
infill: solid walls
support: NO
walls: 3
top and bottom layers: 2 to 4
material: PLA
Parts Needed:
608-2RS Bearings: https://tinyurl.com/2ctn43y3
Bolts: https://tinyurl.com/5bz4xaz6
Special Instructions:
Drill Out Central Hole With 4mm Drill Bit holding parts in vice or with pliers prior To insertion into Bearing as its almost impossible afterwards
please feel free to leave comments and feedback
please checkout my other designs:
https://www.thingiverse.com/carter\_383/designs
Links:
printer: https://tinyurl.com/whd9ruaj
filament: https://tinyurl.com/pr7d5cs6
Printer Brand:
Creality
Printer:
Ender 3
Rafts:No
Supports:
No
Resolution:200
Infill:
38
The author marked this model as their own original creation. Imported from Thingiverse.