Spool Holder

Spool Holder

Notes:
Work In Progress
TO-DO
design mounting system

print Settings:
nozzle diameter: 0.40mm
layer height: 0.30mm
infill: 25%
support: NO
walls: 4
top and bottom layers: 3 to 4
material: PLA

Parts Needed:
608-2RS Bearings: https://tinyurl.com/2ctn43y3
M4 Nuts and Bolts: https://tinyurl.com/5bz4xaz6

Special Instructions:
if printing the support free version drill out holes with 4mm drill bit

please feel free to leave comments and feedback
please checkout my other designs:
https://www.thingiverse.com/carter\_383/designs

please also consider donating a small amount to help allow me to turn this into a carer or please just leave me a comment with any advice on hoe yo improve my designs or ideas or new ones
https://paypal.me/3DCarter383?locale.x=en\_GB

Links:
printer: https://tinyurl.com/whd9ruaj
filament: https://tinyurl.com/pr7d5cs6

Print Settings

Printer Brand:

Creality

Printer:

No

Supports:

200

Infill: