A wrench for removing lids to IBC totes.
Sizing does seem to very based on manufacturer so make sure you measure before printing. The Inner dimensions of the wrench are 170mm for the ID, 182mm for the od of the splines, and the splines themselves are 6mm x 6mm.
The model was designed to fit onto the bambu labs 256x256 build plate. I would recommend printing it out of petg. I printed with a 0.4 nozzle so your settings may differ, but my recommendations are;
Scale down Z height to 50%-75%
5 top and bottom shell layers
6 wall loops
30% gyroid infill
Print outer then inner walls
Other than that mostly stock settings in orca slicer.
The author marked this model as their own original creation.