Bezier Curve Boomerang
Description
PDFA little exercise to practice the modeling techniques as in the video below. This boomerang is not all that different from my previous designs, but since it worked quite nicely right off the bat, I decided to publish it.
It has a surprisingly long range for a boomerang that is not hook- or omega-shaped, i.e., does not have a large inscribed circle. Throw not too high and with a bit of layover.
Print Settings
Rafts:
No
Supports:
No
Notes:
Use 4-6 perimeters and top and bottom layers, respectively. Fewer than that and it might be too light and possibly not stiff enough. Make sure it lies flat when coming off the build plate; boomerangs like to warp downwards after printing. If so, that must be corrected by bending and possibly applying a little heat.
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.